Vinyl Fence

A Guide to Getting Vinyl Fencing Installed on a Slope

Vinyl fences are the way to go if you want a durable fence that won’t scratch easily and is easy to clean. These types of fences may be installed on practically any surface. Hills, sand, and, of course, dirt are all examples of this. However, installing it on a slope is more challenging since it necessitates additional procedures and preparation.

With the help of this guide and the right installation services, you can be assured that your vinyl fence will be installed on a slope correctly and without too much difficulty. Continue reading to know more.

1) Pick Stair-Step or Racked Fence Installation

One popular fence installation is the stair-step method, which is perfect for slopes even up to 30 degrees. You need to install the panels as you would in a horizontal fence, keeping it leveled rather than angled. This is in comparison to racked-style vinyl fences are more suited for land with a more noticeable curvature.

2) Take the Distinct Measurements

The next step is to take the measurements to guide the rest of the installation plan. The first requirement is to measure the height of the fence, which should be based on the ground level. This can vary when it comes to sloped foundation, so allow a professional to handle this, as well as other measurements like the length of the fence. 

3) Know How to Deal with Flood and Erosion

In some cases, you may encounter some type of flood or erosion. There will be a need for erosion control or flood control during the installation of the vinyl fence. Install the wall on the higher side of the slope, and you should use stronger posts. A diagram is usually provided with this type of installation.

4) Check Your Materials and Installation Services

Before you start, you should double-check your supplies and the installation services that will be used and hired. You want to be sure that these products are of high quality because they will be put on the slope. Additionally, you might want to pick a contractor with some expertise in installing vinyl fences on slopes.

5) Get the Posts Up

The posts must be placed at least 5 feet from the edge of the uneven ground. In order to do this, you will have to dig a deep enough hole for them to stand up. Make sure the post is perfectly straight on the top and propped up tightly. Lastly, pack the dirt around the base, making sure that it’s stable.

6) Have the Panels Attached

The panels must be attached to the post first, with the drainage holes at the bottom and the smooth side facing inside. To join them to the wooden ties, use a cable tie. A post bracket from your vinyl fence package should be available for use as these connectors. Make sure that the panel extends about one inch out of the post.

7) Add the Fence Trim

After all the panels are installed, add your fence trims. This should be done before striking the fence together, and it should be connected before the landscaping. A fence trim ought to be included in the fencing installation kit. This last detail will give the vinyl fence a finished appearance.

Conclusion

Installing this kind of fence on a slope might be tricky, especially if you are not experienced with do-it-yourself tasks. But now that you know how to install it correctly, you have everything you need to build a fence that looks amazing and will last many years.

Interested in getting a black vinyl fence? BLACKline offers stylish and durable black vinyl fencing that is designed for high-temperature performance. Get in touch with us today!

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest
Quick Quote
Delivery Type